Nederman - Bench Top Extraction Systems

Print

Bench Top Extraction Systems

* BenchTop Extraction Arms

FX Extraction Arm 32


The Nederman BenchTop arms can be used in every type of environment, ranging from assembly stations, where solder fumes are extracted, to laboratories, where protection against highly corrosive or noxious gases is vital.


FX Extraction Arm 50


Made of light-weight anodized aluminium sections, with two or three adjustable, plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to dismantle for easy cleaning.

FX Extraction Arm 75



Made of light-weight anodized aluminium sections, with two or three adjustable plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to dismantle for easy cleaning.

FX Extraction Arm 100


Made of light-weight anodized aluminium sections with two or three adjustable plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to dismantle for easy cleaning.

* Bench Top Extraction Kits


Extraction Kit Original 500



Designed for one smaller workplace, where the demand for airflow is up to 30m³/h per arm. The kit consists of an extraction arm FX 32 with table bracket, filter unit and fan N3. One speed on/off. Complete with hose and extraction hood. The hood is made of clear plastic, which increases the visibility (not the ESD hood). Also available in an ESD version for the electronics industry.

Extraction Kit Original 1000



Designed for two smaller workplaces for simultaneous use, where the demand for airflow is up to 42m³/h per arm. The kit consists of two extraction arms FX 32 with table brackets, filter unit and fan N3. (For more information see separate product section.) The speed of the fan is variably controlled by a speed controller. Complete with hoses and extraction hoods. The hood is made of clear plastic, which increases the visibility (not the ESD hood). Also available in an ESD version for the electronics industry.

Extraction Kit Original 1500



Designed for three smaller workplaces for simultaneous use, where the demand for airflow is up to 38m³/h per arm. The kit consists of three extraction arms FX 32 with table brackets, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hoses and extraction hoods. The hood is made of clear plastic, which increases the visibility (not the ESD hood). Also available in an ESD version for the electronics industry.

Extraction Kit Original 2000


Designed for one workplace, where the demand for airflow is up to 100m³/h. The kit consists of a FX 50 with swivel, table bracket, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hose and combination hood. The hood is made of clear plastic, which increases the visibility (not the ESD hood). Also available in an ESD version for the electronics industry.

Extraction Kit Original 2500


Designed for two workplaces, where the demand for airflow is up to 75m³/ h per arm. The kit consists of two extraction arms FX 50 with swivel, table brackets, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hoses and extraction nozzles. Also available in an ESD version for the electronics industry.

Extraction Kit Original 3000


Designed for one workplace, where the demand for airflow is up to 150m³/h. The kit consists of an extraction arm FX 75 with swivel, table bracket, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hose and extraction nozzle. Also available in an ESD version for the electronics industry.

N3 Fan and Filter Cartridge

It is designed for extraction and filtration of noxious fumes and vapours for the smaller workplace, for instance when soldering, gluing or working with solvents. It is intended to be used in different combinations with the FX arms or the Down Flow Grille FD 23.

Down Flow Grille FD 23


Typical workplaces are schools, laboratories, electronic and medical industries. Recommended to use together with fan/filter CX 5500, or fan N3 with filter. Made of stainless steel which resists many common chemical substances. Can easily be used in combination with an extraction hood for increased extraction capacity. Grille Ø 260 mm. Connection Ø 45 mm.

Contact Our Team Tata Group

Marketing   Jenny   Santi   Sales Coordinator  Lily    Jully 

Accounting  Yani  Dewi Management  Yudi      Subandi  



Scan for Send Email

Tata Emerindo Group

PT. Tata Emerindo TradingPT. Batam Marine Engineering IndonesiaPT. Perfect Seal Indonesia
PT. BME WIJAYAPT. MASTERCAL
Sunday the 23rd. KlikBatamWeb.com