Industrial Scientific - Fixed Transmitters

Print

Industrial Scientific - Fixed Transmitters

Oldham CTX300
• O2, CO2 (infrared version), refrigerant or toxic gas monitor
• Pre-calibrated sensor modules
• Designed for unclassified areas
• Optional backlit display

When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, The CTX 300 can satisfy the most demanding safety requirements.

The CTX 300 transmits data in record time. And, with a wide range of sensor options, it has the flexibility to protect many potentially hazardous environments.

Maintaining the unit is easy with pre-calibrated sensors and an optional LCD display.

 


OLCT60
• O2, toxic or combustible gas monitor
• Explosion proof
• non intrusive calibration, on-board display and 4-20 mA output• SIL2 capability

Introducing the OLCT 60, a new generation of high quality gas detectors which covers all industrial needs for a variety of applications.

The OLCT 60 Series is composed of several versions:
• XP or IS sensor (toxic or oxygen versions)
• Remote or on-board sensor. The OLCT 60AD version allows the sensor to be intsalled remotely up to 15 meters (standard),
allowing detection in inaccessible locations, or in Zone 0 in the case of the intrinsically safe (IS) version.

The detector units are made of 316L stainless steel, and are rugged and resistant to corrosion. Pre-calibrated sensors can be disconnected by turning the head of the unit. These “smart” sensors can be calibrated outside hazardous areas.

The OLCT 60 is equipped with non-intrusive access to a safe menu. In hazardous areas, calibration can be done with an operating mode in accordance with safety rules.

• Access to maintenance menu
• Pure air injection
• Zero validation*
• Standard gas injection
• Calibration validation taking into account the usage rate*
* Automatic adjustment of zero and sensitivity

All of these tasks can be carried out without opening the detector, using a unique magnetic key.

Access to the maintenance mode is protected to avoid accidental reprogramming of the unit.

The units are available at either 230 V AC, 125 V AC or 24 V DC.


iTrans
• O2, toxic or combustible gas detector
• Dual sensor platform (on-board & remote placement)
• Split-screen LED display
• 4-20 mA and ModBus RTU output

The iTrans fixed-point gas monitor employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs.

Able to monitor any combination of gases for a specific environment, iTrans utilizes our industry-proven “smart” sensor technology and safety features including automatic sensor recognition, access code security, and zero and cal fault protection – all enclosed within an explosion-proof aluminum or stainless steel housing.

The microprocessor-controlled transmitters are capable of independent operation or multi-point system configuration. With optional on-board relays, the monitor has the added ability of stand-alone operation, activating alarms, horns, or fans and can also shut down a system without the need to wire back to a central control panel.


OLCT80
• O2, toxic or combustible gas monitor
• Explosion proof
• Triple head analog/digital transmitter
• 3 on-board relays and non-intrusive calibration

Developed in compliance with the strictest specifications, OLCT 80 transmitters are the standard in the gas detection market.

Designed to meet the demanding needs of the largest industrial companies, the OLCT 80 is a major achievement in terms of technical performance and cost optimization.


AirAware
• O2, or toxic gas monitor
• Can monitor, transmit and control
• 4-20 mA or ModBus RTU outputs
• Light industrial or commercial applications

Industry proven performance combined with a new, low-profile design make the Industrial Scientific AirAware™ a logical choice for those critical areas that require continuous monitoring but not the environmental protection of an explosion-proof enclosure. Providing discrete monitoring and enhanced aesthetics for more commercial or institutional settings, the AirAwareTM Series is the ideal solution for reliable, low-cost fixed-point monitoring.

The AirAwareTM can be configured to operate as a monitor with local LED display, a controller with onboard relay switching capability, a transmitter with 4-20 mA or ModBus RTU outputs, or as a transmitter with on-board relays. Each configuration is designed to meet your specific indoor monitoring needs. Every AirAwareTM is equipped with electrochemical sensing technology, dual alarm LEDs, a digital display providing real-time readings, push-button operation and a NEMA 4 type enclosure. When alarm conditions are met, low/high alarm visual indicators alert users to gas hazards.

A number of output options are available that allow the AirAwareTM to communicate to external controllers or control external audible/visual alarms. All AirAwareTM units are ModBus enabled for digital communication back to a PLC or DCS system. An optional 4-20 mA output is also available to connect the AirAwareTM to almost any control device. Relays can also be added to turn on fans or warning sirens, or to shut down a process. Standard operating power is 12-24 VDC for the AirAware, while a 120 VAC power supply option is available for convenient plug-in monitoring applications. Configure your AirAwareTM to match your needs, adding options such as on-board audible alarm for maximum attention, or a vanity plate to hide the display. The AirAwareTM is covered by a one-year warranty and carries CSA approval for non-hazardous locations.


OLCT 10 - OLC 10
• CO, NO, NO2, refrigerant or combustible gas monitor
• 4-20 mA output
• Easy to install and use
• Designed for boiler rooms and car parks

Designed for use in boiler rooms and parking garages, the OLCT 10 and OLC 10 monitors give you the most cost-effective solution for the continuous monitoring of toxic (OLCT 10) or flammable gases (OLCT 10, OLC 10) and vapors in ambient air. Easy to install and operate, these detectors combined with the MX 15 control unit meet demanding user requirements.


iTrans SS
• O2, toxic or combustible gas detector
• Corrosion resistant housing
• Dual sensor platform (on-board & remote placement)
• 4-20 mA and ModBus RTU output

Enclosed within an explosion-proof stainless steel housing, the Stainless Steel iTrans™ is built to withstand corrosion in harsh environments such as offshore drilling platforms, chemical plants or applications near a saltwater coastline.

The iTrans monitors employ an intelligent electronics platform to provide maximum flexibility, superior performance and lower installation costs. The three or four wire system allows gas sensors to be mounted on-board or remotely up to 200 meters away, and can accommodate more than 200 transmitters in RS485 bus configuration. Able to monitor any combination of gases for a specific environment, iTrans™ uses our industry-proven “smart” sensor technology and safety features including automatic sensor recognition, zero and cal fault protection, and access code security.

The microprocessor-controlled transmitters are capable of independent operation or multi-point system configuration and can transmit a 4-20mA signal or ModBus RTU digital output to any control device or PLC. With optional on-board relays, the monitor has the added ability of stand-alone operation, activating alarms, horns, or fans and can also shut down a system without the need to wire back to a central control panel.

iTrans also offers a relay deactivation feature to prevent accidental alarm activation during calibrations. The units also feature simple non-intrusive calibration, ultra-bright LED display, programmable alarms, and on-board sensor life indicators.


OLCT IR
• Infrared combustible gas monitor
• SIL2 approved, MTBF more than 28 years
• Heated optics, dirty optics compensation, double sources
• Maintenance free ideal for onshore and offshore applications

Offshore platforms, petrochemical and chemical industries, naval installations, waste water treatment plants… in these types of environments, infrared technology is very often the only solution. The OLCT IR is built to withstand these harsh environments, which require the most efficient gas and flame detection.

Proven Leading-Edge Technology
“Zero Maintenance” Efficiency
• The semi-conductor electronics of the OLCT IR guarantee extreme accuracy and constant stability.
• Costs are considerably reduced:
- Lifetime detector stability after initial calibration
- Requires minimal maintenance
The answer to false alarms
• The economic implications of false alarms have led us to design the OLCT IR with the ability to ignore external elements that
trigger false alarms.
Non-intrusive calibration
• Equipped with a non-intrusive system allowing a single operator to access a protected menu.
• The detector can therefore be calibrated in an explosive area in total compliance with safety rules.

Two Confi gurations for Adapting to Your Site
Standalone Version
• Includes a case fitted with a mounting system and a wiring compartment for electrical connections in explosive zones.
• Magnetic system for calibrating in explosive zones without opening the compartment cover.
Free-Fitting Version
• Includes a case fitted with a 3-wire output for connection to any approved junction box.

Unrivaled Performance
Reliability
• Highly resistant to sensor poisoning
• High gas concentration does not saturate the transmitted signal
• All vital functions are maintained even if an accumulation of dust or other substances reduces transmission by 70%.
• Heated mirror and window to prevent misting or icing of the optics
• Operates in an oxygen deficient atmosphere
Durability
• Stainless steel explosion-proof compartment, secure connection compartment
• The mirror is made of quartz
• External optics are made of quartz capable of withstanding high pressure and abrasive substances.
Special Version
• Simultaneously optimizes the response to various hydrocarbons, meeting the requirements for multihazard sites.


OLCT20
• O2, toxic or combustible gas monitor
• Explosion proof, Intrinsically safe
• 4-20 mA output• SIL2 approved

The OLC(T) 20 Series of gas detectors are designed for indoor or outdoor facility monitoring and other applications to accommodate your gas detection requirements at a reasonable price.

OLC 20 Detector
The new generation of OLC 20 combustible sensors are unaffected by poisons. The units provide extremely quick response times and complete reliability. They can be fitted on a housing with a M25 or 3/4" NPT thread.

OLC 20D Detector
Based on the OLC 20 sensor unit, the OLC 20D detector is equipped with a 15 m long cable (standard version) and fitting gland for direct connection to a data logger. A high-temperature version allows operation at 200°C.

New Generation: New Advantages
The stainless steel detector provides protection and resistance to corrosive agents. Classified IP 66, they are resistant to dust and water ingress. The precalibrated sensors of the OLCT 20 and OLCT 20D can be disconnected by turning the head of the unit. These “smart” sensors can be calibrated on a work bench, outside hazardous areas.


iTrans StandAlone
• Mounted audible and visual alarms
• Low cost, fixed-point gas detectors
• 4-20 mA and ModBus RTU output
• Highly visible, split-screen LED display

Industrial Scientific is pleased to announce the release of a complete stand-alone fixed system consisting of an audible and visual alarm mounted directly to the iTrans™ and wired to the low and high alarm relays. Different audible tones distinguish between low and high alarms while the ultra-bright strobe and LED display alert workers that a gas hazard is present. An optional 24 VDC power supply can be added to create a complete plug-in functional system that is easy to install and operate.

A 4-20 mA output and ModBus interface, allow the unit to be connected directly to a PLC, DCS, or standalone control system. Industrial Scientific’s “smart” sensor technology allows for single or dual sensor operation. The sensors can be mounted directly onto the iTrans™, or placed remotely up to 200 meters away. The unit can be upgraded in the field by adding a second sensor at a later date. This capability makes the unit extremely flexible and cost-effective.

Industries and Applications:
Steel Manufacturing – O2, LEL, CO, or CO-H2 Null
Drilling – H2S and LEL
Refining – H2S, LEL and SO2
Pulp and Paper – Cl2, ClO2, SO2, and H2S
Power Plants – LEL, O2, and CO
Water/ Waste Water Treatment – Cl2, ClO2, and H2S
Food Processing – NH3 and O2
Tunneling / Ventilation – CO


CEX300
• Combustible gas monitor
• Explosion proof sensor
• Minimum response time
• Durable housing

Designed for the industrial and commercial sector (buildings, schools, boiler rooms, etc), the CEX300 flammable gas detector has a durable housing and an explosion-proof sensor.

The CEX 300 is designed to be connected to a controller and can be placed in hazardous areas to guard against risk of a gas explosion. The CEX 300 detector has an ingress protection rating of IP 66 (dust-proof and water-resistant).


OLCT50
• O2, toxic or combustible gas monitor
• Explosion proof, Intrinsically safe
• 4-20 mA output• SIL2 approved

Introducing the OLC(T) 50, a new generation of high quality gas detectors designed for manufacturers, refineries and other industries to accommodate your gas detection requirements at a great price.

OLC(T) 50 Detector
The enclosure, which is made of alloy AS7 606 is coated with polyester epoxy paint (stainless-steel is also an option), and is rugged and resistant to corrosive agents. The OLC(T) 50 detectors are practical and easy to use. The combustible gas sensors are insensitive to poisons, offer quick response times and provide accurate gas measurement.

OLC(T) 50D Detector
Based on the OLC(T) 50 detector-transmitter, the OLC(T) 50D allows the detector unit to be used in remote mode.
The detector is equipped with a 15 meter long cable (standard) and a packing gland for direct connection for detection in difficult locations.

New Generation: New Advantages
The detector units, which are made of 316L stainless steel, are durable and resistant to harsh environmental elements. Certified IP 66, OLC 50 and OLCT 50 Series are tightly sealed to avoid contamination from dust and liquid splashes. The pre-calibrated sensors of the OLCT 50 and OLCT 50D can be disconnected by simply turning the head of the unit. The “smart” sensors can be calibrated outside hazardous areas on a bench.

 

 

 

Contact Our Team Tata Group

Marketing   Jenny   Santi   Sales Coordinator  Lily    Jully 

Accounting  Yani  Dewi Management  Yudi      Subandi  



Scan for Send Email

Tata Emerindo Group

PT. Tata Emerindo TradingPT. Batam Marine Engineering IndonesiaPT. Perfect Seal Indonesia
PT. BME WIJAYAPT. MASTERCAL
Friday the 20th. KlikBatamWeb.com