Industrial Scientific - Docking and Calibration Stations

Print

Industrial Scientific - Docking and Calibration Stations

DS2 Docking Station
• Automates calibration, record-keeping, diagnostics and battery recharging
• Stand-alone Instrument Docking Stations (IDS)
• Link up to 700 IDSs
• One centralized database

The DS2 Docking Station™ provides the ultimate flexibility for managing your gas monitors wherever you use them. Ethernet connectivity enables you to link up to 700 stand-alone Instrument Docking Stations (IDSs) from remote locations anywhere in your facility and relay the data back to one central database for total instrument management. A graphical user interface tool allows an administrator to view operations on each Docking Station from a network computer, making it easy to track instruments, print reports, set events and change parameters for any location. The DS2 gives you all of the benefits of consistent automated calibration, record keeping, battery recharging, and instrument diagnostics for your monitors to limit your liabilities and safety hazards.

Each individual IDS features a multilingual display, three status LEDs, a keypad and an audible alarm to provide important instrument details at a single glance. The DS2, which can be easily grouped into ‘clusters’ of up to 5 units to share calibration gas, also offers optional iGas® capability to automatically identify calibration gas cylinder concentrations, lot numbers, and expiration dates on the system. Whether you manage one gas monitor or an entire fleet, the DS2 provides superior cost-savings and flexibility.


M-Cal Calibration Station
• Stand-alone operation. No PC is required.
• Calibration & function (bump) testing
• Battery recharging
• Simple, two-button operation

With the M•Cal™ Calibration Station, calibrating, bump testing and charging the M40 Multi-Gas Monitor has never been easier or more cost-effective. Available in single- or six-unit versions, the M•Cal will accommodate all M40 monitors with software version 4.0 or higher in a diffusion mode or with an SP40 sampling pump attached. The M•Cal features simple, two-button operation allowing the user to quickly and easily calibrate or function (bump) test the instrument, and the LED indicators display whether or not the instrument passed or failed the desired function.

A PC is not required to operate this stand-alone system, making the unit extremely portable and flexible. Available accessories include an optional battery powered kit that enables the system to be used in remote areas, and a serial data printer that automatically prints calibration and bump test reports. The reports can be used for confined space entry permits with information pertaining to instrument serial numbers, pass/fail indications, bump test readings and full span readings for each sensor installed in the M40 monitor.


MX-Cal Calibration Station
• Transportable, stand-alone operation with no PC required
• Increases safety with consistent calibrations and bump tests
• Provides proof of compliance with hard-copy records from an optional, external printer

Manually bump testing and calibrating gas detectors is a time-consuming burden for many organizations. The MX•Cal Calibration Station simplifies these tasks, allowing users to initiate them with the push of a button.

The MX•Cal is easy to transport with no PC required. When used with a PC, the MX•Cal automatically downloads calibration and bump test reports via a standard USB connection (USB 2.0 preferred). Users can access alarm event data to keep track of gas exposure or to monitor high-risk areas. This PC connection also makes it easy to configure the MX4’s preferences.

An optional serial data dot matrix printer automatically prints calibration and bump test reports. This proves regulatory compliance with records of instrument serial numbers, pass/fail indications, bump test readings and full span readings for the MX4.


Cal Plus Calibration Station
• Stand-alone operation - no PC is required
• Simple, push-button calibration or function (bump) testing
• Immediate report generation
• Built-in printer option

With the new Cal Plus™ Calibration Station, calibrating and bump testing the GasBadge® Plus Monitor has never been easier or more cost-effective. The Cal PlusTM features simple, two-button operation allowing the user to quickly and easily calibrate or function (bump) test the instrument. The large LCD display and LED indicators then show whether or not the instrument passed or failed the desired function.

A PC is not required to operate this stand-alone system, making the unit extremely portable and flexible. The unit can be used in remote areas with the optional battery powered kit, or mounted to a wall along with an optional calibration gas cylinder holder. When used with a PC, Cal PlusTM software generates calibration and bump test reports that are automatically downloaded via a standard USB connection. The unit also downloads alarm events and instrument details to the PC, allowing the user to quickly and easily configure instrument preferences.

The Cal PlusTM is also available with a built-in dot-matrix printer that automatically prints calibration and bump test reports to provide permanent documentation of instrument serial numbers, pass/fail indications, bump test readings and full span readings for the GasBadge® Plus.

 

 

 

Contact Our Team Tata Group

Marketing   Jenny   Santi   Sales Coordinator  Lily    Jully 

Accounting  Yani  Dewi Management  Yudi      Subandi  



Scan for Send Email

Tata Emerindo Group

PT. Tata Emerindo TradingPT. Batam Marine Engineering IndonesiaPT. Perfect Seal Indonesia
PT. BME WIJAYAPT. MASTERCAL
Monday the 19th. KlikBatamWeb.com